SeaDeck material question

[spinxt]

I need to replaced some aged vinyl pads on my trailer and boat and I'd like to use SeaDeck material. Does anyone know if you can route SeaDeck to achieve a nice edge profile?

[Sride]

I'm afraid if you try and route it that it will snag and you won't get an even finish. I'd order a small sample and give it a try, but more than likely it needs to be planed with a razor.

http://www.seadek.com

[BFWAKE75]

I know a guy who is good friends with my brother who is a dealer. Funny I just saw him 2 weeks ago at dale hollow lake and he has a g23 with sea dek all over it. I asked him how I go about getting some and he told me that you just give him the measurements and they make it to any size.

[BSUBU_Kris]

They will do templates if you want. I ordered a sheet and cut with a straight edge. I put it pretty much everywhere on the hull deck. I also put some on the trailer. Here is a link to my install. Third summer (250 hours) and still holding up great.

http://www.themalibucrew.com/forums/index.php?/garage/vehicle/72-malibu-wakesetter-23-lsv/?tab=mods&mod_id=69

Kris

[TrickyNicky]

They will do templates if you want. I ordered a sheet and cut with a straight edge. I put it pretty much everywhere on the hull deck. I also put some on the trailer. Here is a link to my install. Third summer (250 hours) and still holding up great.

http://www.themalibucrew.com/forums/index.php?/garage/vehicle/72-malibu-wakesetter-23-lsv/?tab=mods&mod_id=69

Kris

You my friend are genius!!! That is exactly what I need.