Rev410 on Illusion X Tower?

[Alan-405]

Who here has done this setup before? Will i need to get a different set of clamps then they come with? Im lookin at getting the REV410 and want to be sure they will mount to the tower before hand. I already have PRO 80's mounted and wanted to stick the REV410 in the middle part of the tower. If possible, can anyone please post pictures so i can see. I tried to search from my work PC but access blocked from the firewall lol. Dang GOV networks hahaha....

Thanks

Alan

[wakesetter8796]

I've seen it before, I think on another forum.

[Alan-405]

Another Question, If able to mount, Can you get away with mounting with the Fixed Clamps? I know there is the option for swivel. Reason why i ask is the set im wanting to get has fixed clamps on it already. I know the Bar has a slight curve but wasnt sure if it was enough to matter.

Thanks again.

Alan

[SuperchargedC6]

This is not the rev410, but i think it mounts the same as this one. I will warn you that you are going to hit your head alot on it!

[Alan-405]

Nice, is that your setup? I know the head clearance will be an issue. I have the XTi so i wont be walking in the middle of the boat since the motor is there. Which syle of clamps did you use? Fixed or swivel?

[MLBurns]

http://s628.photobucket.com/user/ls1haha/media/photo3.jpg.html?sort=3&o=1

http://s628.photobucket.com/user/ls1haha/media/photo1-1.png.html?sort=3&o=0

http://s628.photobucket.com/user/ls1haha/media/photo4.jpg.html?sort=3&o=2

My bro-in-laws set up. Drill and tap the tower and put a 1/4" rubber spacer between the speaker and tower, no mount, more headroom.

Edited March 20, 2013 by MLBurns

[SuperchargedC6]

Yeah that's my set up. We mounted to the hoop with fixed clamps.

[shawndoggy]

my head hurts just looking at that. Unless you are under 5' tall you WILL bang your head.