Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Should the flywheel be visible on an L96?

Recommended Posts

or it may have rattled off and has slid up underneither your gas tank or somthing.. seen it before.. but yes there should be 2 screw on the bottom side of your bell housing that hold that sheild on..

Link to comment

IMO no.. some people freak out and want it on ther but again IMO if you have anything rolling around in your bilge i wouldnt worry about it.. they have a tendancy of coming loose and then hitting your flywheel witch cause a very annoying sound and you think your tranny is going out.. its not water tight when its on there so by it being off dont do much either lol.

Link to comment

Where is it? That is the question. Just make sure it is not under the tank as mentioned, would not want it wedged in there rubbing a hole in the tank. (if it can fit, IDK)

Link to comment

The plate is not in the bilge and this is a TXi so the chances of it getting back under the gas tank is about zero.

So it either came without it or the previous owner removed it for some reason.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...