Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

05 XTI 21.5ft floor panel


Recommended Posts

How do I get the freaking floor panel up on a 21.5ft XTI to grease the rudder???? I found 2 screws, but I cant get the panel to budge. Am I missing something?

Link to comment

With my XTI i just took the screws out and slid it towards the motor just enough to get my fingers in there and then i pulled it up. If you have to, hit where the table pole goes into with a rubber mallet or use a large screw driver or pry bar to slide it back.

Link to comment

With my XTI i just took the screws out and slid it towards the motor just enough to get my fingers in there and then i pulled it up. If you have to, hit where the table pole goes into with a rubber mallet or use a large screw driver or pry bar to slide it back.

I used the same method on my xTi. Also, you can change the fuel filter while you have the panel out.

Link to comment

On mine, I can get to the fuel filter by removing the rear facing seat. I plan on winterizing this weekend so I will try to get panel up to grease rudder. Thanks guys

Link to comment

On my 23 XTi I have to remove the rear facing seat brace to remove the panel. Stupid design but only takes 10 min to remove it.

looks like this is what I am going to have to do also.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...