Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Impeller puller help


highlife02

Recommended Posts

I bought a sea dog impeller puller and it doesn't seem like the jaws are long enough. The jaws are roughly 2.5"long. If any one could measure their jabsco that would be appreciated. Thank you

Link to comment

Easier yet; pull the cover, spray a little WD40 in there, bump the motor over (just enough to spin the impeller a bit), then pull it out with needle nose pliers.

+1

Link to comment

Easier yet; pull the cover, spray a little WD40 in there, bump the motor over (just enough to spin the impeller a bit), then pull it out with needle nose pliers.

Agree, the engine bump is the way to go along with the puller.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...