Ski Bindings

[kengrutza]

Ok Crew

I have a dilema. My son tore his Obrien 990 slalom binging and there's no more of those out there.

I have an old Connnelly binding the correct size but need to mount it to the Obrien plate.

The holes for the locating pins and screws are not the same...

What would you guys use to punch the holes in the neoprene?

Thanks in advance,

Ken

[skistud1]

A drill if possible.

[msuwaterski]

Anytime I have had to punch a hole in neoprene I have used the tip of a 1" wood bit. Just the tip (just to see how it feels(name that movie)) because it is more of an auger style bit it will actually carve out a nice little hole vs. get all twisted up with a normal bit.