Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

06 21.5' sunscape - no stock ballast + flyhigh = tank buster?


OneMoreSet

Recommended Posts

Looking at a Sunscape that was ordered with no factory ballast. The owner had the dealer add 750s to the rear using tsunamis, but nothing to the front/centre.

If I add a centre bag in the ski locker and maybe a front under the seats would this be a good setup?

Seems like this would be the same as a tankbuster setup?

Any drawbacks to not not having the factory setup ballast setup?

What are the stock weights on this gen 21.5' hull?

Cheers!

Link to comment

Before there were hard tanks there were ballast bags in ski lockers. Measure the locker to see what you can get in. Probalby about 500# then up front you can use small fat bricks in the storage areas or smaller bag in the walk way.

Should work well

Link to comment

We run ('05 21LSV, diamond hull, no wedge)

750s in rear locker

Side sac under port seats

Rear seat sac in ski locker

And the 711 bag under the front seats

We fill the appropriate bags for the activity we're doing. The only time we're looking for more weight is when we're surfing. The overall set up is good and we have no worries about throwing gear on the bags when they're empty.

Edited by catcando
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...