Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
MalibuTim

2006 Response dash speakers

Recommended Posts

MalibuTim

I am replacing the speakers in my boat and was wondering what the best way is to do the dash speakers? Does the windshield have to come out or can the dash be moved to have better access?

If the windshield has to come out is it very difficult?

I did a search and couldn't find anything around the same year.

Thanks in advance.

Share this post


Link to post
Bradley Thornton

I have a 06 V-Ride I just pulled the windshield out it is a very easy job most are just screws but a few are nut and bolt in the corners so keep that in mind you may want to go ahead and tint the windshield while you have it out. Just a idea I wish I would have. Also I had to do a little cutting on some fiberglass to get my new speakers to fit so before you buy you may want to get the old ones out and see how much room you have. The cutting was small and not a big deal.

Share this post


Link to post
Shaboy6

I agree with Bradley. I have a 98 response and was hesitant on pulling the windshield but its a very simple job. I pulled mine twice because I decided to tint it so just do it once if you think you might go that route.

Share this post


Link to post
MalibuTim

Thanks guys, it was as you said, i removed the rubber at the base of the windshield and removed the screws and the three nuts and bolts in the corner of the window. Unfortunately the new speakers did not solve the crackling sound from the dash speakers!

Next i'll check the amp I guess.

Share this post


Link to post
Bradley Thornton

I would run new wires if I was you. You can buy a wire feeder at lows it makes it a lot easer to run the wires under the floor. Just in case your not sure where to run them under the walk thru area. Hope you get it fixed!

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...