Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Perfect pass on a '96 sunsetter vlx


dlowry81

Recommended Posts

Can anyone help me with changing my throttle from a push to pull system to allow me to install a perfect pass system? How to route cable, brackets needed, changes in the lever, etc.

Link to comment

No perfect pass requires the throttle to be set up as a pull open system. Mine currently pushes with the cable to open the throttle. I know the conversion can be done and is supposedly straightforward I'm just looking for some tips and assistance.

Link to comment

Nick if you don't mind a few more showing the routing and if there are any brackets that support the cable that would help a ton. Yes I do have your other pic you posted.

Link to comment

First pic is the blueish grey plate for support and cable clamping.

Second one is the back side.

Third is the throttle cable attached to the throttle at the captains chair. The throttle cable comes from the throttle and goes towards the bow of the boat under the dash board. Then it goes threw a hole in ther floor and into the ski locker, back along the gas tank, then into the rear stortage locker by the gas fill hose where it is hooked up to the gas tank and finally up to the engine. The whole way it is supported by plastic clips to keep it out of the water in the bottom of the boat.

Last pic are the numbers on my throttle cable, I'm guessing the 216 means 21'6" the cable length. But thats just a guess.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...