Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Distributor Rotor on a Monsoon 320

Recommended Posts

I had a great day on Bullards Fathers Day. End of day the boat started running rough(97 sunsetter monsoon 320 ). I decided to change cap and rotor and plugs tonight as this hasn't been done for many years. I cannot get the rotor to slide off the distributor shaft. Any ideas?

Also any thoughts on replacing the bilge blower on this boat. it seems to be buried back behind the fuel tank.


Link to comment

Use a flate blade screwdriver under the rotor, pivot on the housing and push down, it will eventally pop off. Then clean the shaft of any rust and put on a very thin coat of grease so it wont get stuck or corrode again.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...