Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Flush fuel vent


Recommended Posts

How did you hole saw an existing hole? Super steady hands?

I drilled a hole saw into a piece of wood, then I used that to plug the existing hole. then after the glue dried I could use the bigger hole saw to make the bigger hole with no fear of screwing the gelcoat up. I was not going to risk a steady hand on this one. Check out the seat raise I just finished, Pete.


Edited by Vettesetter Z06
Link to comment

Yup did this last year, best thing to save a ski line!

Just wondering, did you have to lengthen the vent hose, and did you point the elbow up?


Link to comment

I didn't lengthen the hose, the original was straight. So there was plenty of hose left over to point the 90 up at a 45 degree. It would be best to put a loop in the hose to help prevent water to get into the tank. I would have, but I don't have enought room in the gunnel for it to work.

Edited by CumminsBu
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...