Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

malibu cruise system- help


Recommended Posts

Hey crew... all my guages are working fine except my digital readout and anolg readout for speed. When I engage the cruise it sometimes holds the spped and then other times both speed controls read that i am going 40-50 miles an hour when i am only going 22pmph. It kicks the cruise off and it obviously will not hold a speed. If i pull from the RPM control all works fine. All guages are reading fine. Is this a paddle wheel issue or maybe a short in the wiring to the paddle wheel?? All help would be appreciated.

Macdaddy

Link to comment

Yes most likely that is what it would be. You can check the paddle wheel by either taking it out or crawl under the trailer and spin it to make sure it is not missing a spoke. If it is you can replace it. Its not hard at all. But I have had the same thing happen and I had a cut on the wire and it got wet. All I did was cut the wire and splice it back together sealed it really well and have never had another issue with it.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...