Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Love my new Acme 515


Brodie

Recommended Posts

I recently installed an Acme 515 on my 96 RLX with 265 hp carb motor and I couldn't be happier. It had the stock Dymex 13x13 prop and even though it looked fine, it seemed slow and vibrated. I gained hole shot, top end and a much smooth ride. For reference, I was running about 4600 rpms and 42 mph on the stock prop. Now I am running about 4700 and 44 (GPS) on the top end. Also, it lowered my rpms at 30 and 34 mph a little (surprising)

Link to comment

I agree, my 95 SS had a Mr. Minus 13x13 and I changed to a 515. The Hole shot and smoothness difference was incrediable, but my rpm's were alittle low, so I put on a 525 and the hole shot got even better. RPM's are 4600 at WOT and 45mph with the 525.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...