Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Power wedge problem?


Recommended Posts

Anyone seen this message before is it a simple fix?

WEDGE FAULT

wait 10 seconds for reset

Caution

Port actuation maxed current draw failure

Thanks,

Mark

Link to comment

I think that is the message I got when I blew the fuse. Try replacing that. It's under the dash hanging down on the left. Red I think. I can't remember what amp. I just bought a varity pack for 10 bucks and keep it with me

Link to comment

Yep, had the exact problem, and couldn't bring the wedge back up. Blown fuse. Dealer has now fitted a resettable fuse which appears to have fixed the problem :)

Link to comment

Anyone seen this message before is it a simple fix?

WEDGE FAULT

wait 10 seconds for reset

Caution

Port actuation maxed current draw failure

Thanks,

Mark

One more thing... I think you have to recalibrate the wedge after you do this. Just a matter of cylcing it up and down using the MTC once or twice. It says how to do that in the manual.

Link to comment

K so both 5 amp fuses are fine but the inline fuse in a separate red small single container that is a 20 amp fuse was blown. So I replaced the fuse and tried the wedge again same message and 20 amp fuse was blown again.

Link to comment
  • 2 months later...

I've checked all of my fuses an none are blown. This is the first time we have wakeboarded with it. Now it's stuck and won't move and in getting the same code

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...