Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Power Wedge - 2008 Wakesetter LSV


Recommended Posts

Good day all....

I have a 2008 Wakesetter 23 LSV that is having an issue with the power wedge. When I lower or raise it, I can hear the grinding of the motor/pump. When I raise it, the fuse blows and I have to reset it a couple of times to get the wedge back up. (Mind you all before you start in on me, I only have done this twice, once when it happened, and once to confirm it wasn't a one time thing).

A friend of mine suggested that it was low on hydraulic fluid and to check and see if that was the problem. So, two questions....since I am a new BU owner.....is that a possibility? If so, where do I check and fill?

Thanks in advance for your help.....

Link to comment

the actuators for the wedge are electric and are screw actuators. also i don't believe that they are serviceable there are 2 of them and it is possible that only one went bad you you will want to disconnect them and check them individually before replacing them both.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...