Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Woodshed

Echelon,,, disconnecting the automatic blower fan wire?

Recommended Posts

Woodshed

I have found the wire on the ignition that turns the fan on when the key is turned. If I disconnect that fan wire would I also be disconecting the auto feature the computer has which turns it on whenever below 1500 rpm?

I want the auto feature gone because the fan runs continuously and is very loud. I want to only have the manual on off switch for the fan.

If this wire at the ignition is disconnected the on/off switch still works, so I'm hoping this is the same wire for the "auto" feature????

Thanks

Edited by Woodshed

Share this post


Link to post
Woodshed

Share this post


Link to post
JDubya

If you are not using your computron just unplug the wires harness and that will stop the auto. Concequently, so will your computron. If that is desired then I would suggest cutting the wire.

However, my blower is very quiet. You might want to look into replacing the motor. If it is loud enough to be that annoying the bearings are prob shot and it should prob be replaced. They are about $30 at West Marine.

7877939.jpg

http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?productId=14779&catalogId=10001&langId=-1&storeId=11151&storeNum=50366&subdeptNum=50379&classNum=50384

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...