Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Power Wedge Maximum Angle?


scott_fx

Recommended Posts

Hey guys,

i'm setting up my wedge controller right now and was wondering what angle the wedge is set at at the most aggressive setting? I'm assuming that it's probably not even a 20 degree difference from it's lowest/least aggressive position.

Link to comment

Hey guys,

i'm setting up my wedge controller right now and was wondering what angle the wedge is set at at the most aggressive setting? I'm assuming that it's probably not even a 20 degree difference from it's lowest/least aggressive position.

Scott - the difference between minimal wedge (0%) and max wedge (100%) is minimal. I beleive the factory set up for wakeboard advance is 88%. Any more that 88% your boat will be very susceptible to proposing. I think most guys will adjust this setting to 75% but the actual movement of the wedge between these settings is very small. I would suggest you may be very close in assuming that there is a 20 degree change from 0% to 100%. I think the best person to give you exact specifics on this would be a local dealer or perahps Paul from Bakes will chime in!

Link to comment

thanks oldskool. That gives me a starting point. i'll have to make my program's limits adjustable on the fly so i can dial it in better. but i think this will help me with my testing anyways.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...