99 wakesetter gauges

[bushman]

i just bought a 99 wakesetter with the monsoon motor, the dash cluster of gauges for oil pressure,temp,voltage,fuel do not work. i pulled the dash apart plug going into gauge is fine no corrsion good connection. i followed the wires where they plug into what appears to be a circuit type board under the dash, all appears ok at that connection. all the circuit breakers are fine and the grounds i checked were good. i was curious if anyone has had this happen. thanks in advance

[haycutter]

i just bought a 99 wakesetter with the monsoon motor, the dash cluster of gauges for oil pressure,temp,voltage,fuel do not work. i pulled the dash apart plug going into gauge is fine no corrsion good connection. i followed the wires where they plug into what appears to be a circuit type board under the dash, all appears ok at that connection. all the circuit breakers are fine and the grounds i checked were good. i was curious if anyone has had this happen. thanks in advance

Try this there is a link to a troubleshooting guide that should help you determine weather it is the gauge or the MDC (dash computer).

My link

This is the direct link to the troubleshooting guide.

My link

I hope this helps!

Tim

Edited November 5, 2011 by haycutter

[bushman]

Try this there is a link to a troubleshooting guide that should help you determine weather it is the gauge or the MDC (dash computer).

My link

This is the direct link to the troubleshooting guide.

My link

I hope this helps!

Tim

Tim thanks so much that's what i was looking for. When i did a search i didn't come up with anything, new to this. Again thanks alot.