Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Removing tower

Recommended Posts

i just removed a tower that i bought and am replacing it with a star one. i mounted the previous tower to the gunnel sides intead of on top. i used marinetex which is basically a marine version of bondo. its easy to mix and put on and sands easily. i put it on the outside first and then let it dry and they applied it under the gunnels to completely seal the holes and provide some backing structure underneath. sand the outside and inside until smooth as desired and finish how you want to. Im covering the outside with some decals i ordered and the inside i simply sprayed black to match the fibers. This stuff is very strong. whatever you do, make sure its a water tight seal. you dont want water getting in the holes and to the fibers.

Link to comment

Thanks, I thought about filling the holes like that but then thought I might want to add the tower again later on. Thought it would be good if there was some type of plating that would work.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...