power wedge problems

[trendsetter]

I have a 2010 23 lsv sunscape,and whenever i press the deploy button nothing happens??

Do i need to reset the power wedge or what should i do

PLEASE HELP

[Malibudude]

Did it work at any point and just stopped working. Nothing hit it?

Did you have spark such as when connecting the battery, there is an in-line fuse that could be part of the culprit.

Does the wedge even try to go up? Keep in mind the boat must be moving or manually spinning the paddle wheel for the wedge to retract, not deploy.

[trendsetter]

Did it work at any point and just stopped working. Nothing hit it?

Did you have spark such as when connecting the battery, there is an in-line fuse that could be part of the culprit.

Does the wedge even try to go up? Keep in mind the boat must be moving or manually spinning the paddle wheel for the wedge to retract, not deploy.

yes,it worked for a while,and then it just stopped working,wont deploy,and yes i am going foreword whilst trying to deploy

is there a reset button anywhere?

[Malibudude]

Don't need the boat moving to deploy only to retract. Any changes to the electrical system? Inspect each actuator make sure they both look completely intact w/ cracks or signs of problems and the cords. Did you check the fuse?

[trendsetter]

Don't need the boat moving to deploy only to retract. Any changes to the electrical system? Inspect each actuator make sure they both look completely intact w/ cracks or signs of problems and the cords. Did you check the fuse?

where is the fuse?

and yess,the boats starter kit burnt out and we replaced it,thats the only elect change