Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Easiest Depth gauge to instal


Dave SML VA

Recommended Posts

I have a 98 Response. It doesn't have a depth gauge and would like to find one that fits the dash of the boat and is not too hard to install. Winter project!!

Any help appreciated

Edited by Dave SML VA
Link to comment

I have a 98 Response. It doesn't have a depth gauge and would like to find one that fits the dash of the boat and is not too hard to install. Winter project!!

Any help appreciated

Probably the best out there IMHO is a Humminbird for about $100. The guage itself will fit a 2 1/2 cutout in most late model dashes. Typically it would need to replace the clock if you have one. The transducer puck gets epoxied to a flat section (so it points directly down) of the hull in the bilge area. Most commonly mounted near the back of the bilge but in front of the prop. Easy install....good luck :thumbup:

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...