Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Floor Heater Stopped Blowing Air- Need help Trouble Shooting

Recommended Posts

Hi guys, as the title states I can't get my heater to flow any air as of a week ago.

It is a 2002 Malibu WakeSetter VLX with a factory air heater.

I checked the fuse panel underneath the driver's throttle area. All the breakers look fine. The switch lights up on the dash but not blower fan.

1. Where should I start

2. Has this been a popular issue with the factory installed heaters

Our lake is freezing. We need the heater working for those cold nights and mornings :)



Link to comment

Thanks Pete. I will start there. I guess the second step, IF I have power to replace the motor if it is worn-out.

I had the heater core leak last summer. I'm not sure how close the blower is to the core (bc I wasn't the one to replace it), but maybe the leaking water destroyed my blower :(

Link to comment

I think it was a 15 min. exposure on a normal summer night. The boat was moving a little. That is why it is blurred in the pic.

beautiful pix.

i can't imagine how you got that long shutter w/o the boat moving in the pix.

that was one calm night.


Link to comment

just curious... what's the water temp at Donner right now?

About 68F last time I checked. The low at night is down to 33-40F air temp. Makes for some cold morning rides.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...