Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Driver's seat

Austin #22

Recommended Posts

I bought the seat from Chee at Malibu when he did the upholstery a few years ago. I think it was a stock Response seat. No square mount. This boat was a rebuild due to rot, so the new floor didn't have a square hole. The new seat brackets screw down to the floor (or base) with some spacers. It slides back and forth, but doesn't swivel. Didn't buy the bolster seat either.

For your's you would just cover it up (or fill in first so id doesn't collect water). I'd recomment using a thick piece of 16" x 16" square piece of plywood (or whatever size -- I have no idea), protected with fiberglass/resin, wrap carpet over it, and screw it down over the hole. Now you'd have a base for your new seat.

Steering wheel is from Ebay. No idea what brand.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...