Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Which impeller (part # and any particular brand)


Recommended Posts

I have a 2004 23 LSV with a 380 Hammerhead motor. Impeller went bad while tubing with the kids. What is the part # I should ask for and any recommendation close to Whittier, CA? Was at Havasu today and heard beeps and thought it was depth gauge alarming but I wasn't that shallow. I realized about 1 minute later when stopped pick up kids that got knocked off tube that it was temp warning. The noticed temp gauge was high but not pegged. I then shut it off and cried. j/k I thought it might be impeller so I got the shower all set to spray hot water. When I turned the engine on again, it barely came out of the shower so I shut it off. Luckily I got towed back by a nice boater that happened to be going by. I pulled the impeller pump out tonight and noticed that when I turned the pulley mount, the impeller rubber didn't turn. I also saw one blade had a small tear. Luckily there wasn't any pieces missing. I don't think anything happened to motor when it got hot. x-ing fingers.

Link to comment

You most likely have a Johnson 09-812B. If that is the case, you can substitute the Globe Run-Dry impeller part #100 J. Check your impeller pump part# to be sure.

Here:

http://www.skidim.com/prodinfo.asp?number=RP061018

or Globe:

http://www.defender.com/product.jsp?path=-1|311|53460|809302&id=809152 <-That is the correct replacement. the picture is inaccurate.

Link to comment

You most likely have a Johnson 09-812B. If that is the case, you can substitute the Globe Run-Dry impeller part #100 J. Check your impeller pump part# to be sure.

Here:

http://www.skidim.com/prodinfo.asp?number=RP061018

or Globe:

http://www.defender.com/product.jsp?path=-1|311|53460|809302&id=809152 <-That is the correct replacement. the picture is inaccurate.

Thanks. The impeller has "JOHNSON 812 B-1" on the inner ring. That is close to what you listed. Do you think it's the same?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...