Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

cannon plug location! please please please help

Recommended Posts

hey guys im haveing a seriouse problem with my gauges. i have replaced every computer on the boat. ive looked at all the wiring and fuses and see nothing blown, cut, frayed, everything lookst perfect! the boat will start and run. but nothing on the controll panel works. my wedge will also go down but not up. every other switch on the boat works perfectly. these problems just started all at once. everything was perfect. and it was like a light switch got turned off. i have read many posts on cannon plug location but i can not find that plug for the life of me. ive looked everywhere! using a power probe, i can put 12v to the red wire with a white stripe comeing out of the mdc box and make my tach start working and i believe the temp is working, it will also show me the volts and oil pressure. but my malibu message center will not come on when doing this. its a 2007 malibu vlx. if anyone can help me or lives near the norman okc area in oklahoma i will gladley pay dearly for some advise or help. thanks robby.... you can also reach me at [email protected] or 405 206 6938

Link to comment

This is the "cannon plug" on an older V-drive.

If you have one, I'd assume it would be in relatively the same location.

It is directly under the ski pylon, in the engine compartment, behind the back seat, right in the middle.

Sorry, I can't help you with your exact problem.


Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...