Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Calibrating the power wedge 07 VTX


CJAY

Recommended Posts

So I went in to the set up on my screen(pre maliview), but couldn't find any settings for the power wedge itself. Anyone have any advice on this?

Link to comment

So I went in to the set up on my screen(pre maliview), but couldn't find any settings for the power wedge itself. Anyone have any advice on this?

Up and down arrow until you get to SETUP, press the E button on the right, select the SERVICE menu item, press E button, you will see POWER WEDGE selection.

Link to comment

I followed the trail and mine only says it on or off. My issue is that it does not go up all of the way its about 1" from the top. It did go all of the way before the dealer had to replace a ram (one was slow and caused it to bind up and pop the fuse). So how do I get the wedge to go up more?

Link to comment

Up and down arrow until you get to SETUP, press the E button on the right, select the SERVICE menu item, press E button, you will see POWER WEDGE selection.

Thank you, I will try that

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...