impeller housing removal

[Macutak]

we were dewinterizing our malibu 06 wakesetter and as we were putting the impeller plate back on the bottom screw broke off flush with the impeller housing. Now we need to get the entire housing unit off to get the screw out. How do we get it off? any better ideas on how to fix this problem?

thanks

[midjb]

not sure if it is exactly the same but on my 03- 3 hex bolts holding unit on wheel connected to belt and one side hex bolt and side bracket and two hoses. remove all being sure to mark the location of the bolts on wheel as realigning can be a bit difficult as you cant see down in there. not difficult to do just tight space. good luck and hope you have long skinny flexible arms.