Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Macutak

impeller housing removal

Recommended Posts

Macutak

we were dewinterizing our malibu 06 wakesetter and as we were putting the impeller plate back on the bottom screw broke off flush with the impeller housing. Now we need to get the entire housing unit off to get the screw out. How do we get it off? any better ideas on how to fix this problem?

thanks

Share this post


Link to post
midjb

not sure if it is exactly the same but on my 03- 3 hex bolts holding unit on wheel connected to belt and one side hex bolt and side bracket and two hoses. remove all being sure to mark the location of the bolts on wheel as realigning can be a bit difficult as you cant see down in there. not difficult to do just tight space. good luck and hope you have long skinny flexible arms.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...