Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
knuthein

getting raw water pump off the engine

Recommended Posts

knuthein

we have to replace our raw water pump. We unscrewed all 3 bolts on the back plate of the pump and removed the hoses and the holding bracket.

The boat is a 06 vlx with hh. Looking at the new pump everything must be loose now but the pump or its base plate is not moving a mm off the engine. I tried WD40 but nothing happens.

Somebody any idea

Thanks

Alex

Share this post


Link to post
BIG JAY

get a pry bar in there. they are pressed on a stud. use a pry bar it always does the trick for me! :rockon:

Share this post


Link to post
knuthein

Thanks. 2 pry bars, one left, one right did the job.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...