Bolt hole covers on Illusion XS Tower

[crazyhigh]

I have a white Illusion XS tower on my 09 VLX and have a wakesurf/board rack on one side and a hydrofoil rack on the other. To give the tower the finished look, what plugs/covers are out there to fill in the unused holes in the tower?

[CedarLakeSkier]

I have a white Illusion XS tower on my 09 VLX and have a wakesurf/board rack on one side and a hydrofoil rack on the other. To give the tower the finished look, what plugs/covers are out there to fill in the unused holes in the tower?

A White XS, post up some pictures? I think I've only seen them in black.

The only thing I can think of in white are the little plastic covers they use to cover up screw heads on the cheap white melamine shelves you buy at home depot, lowes, or Ikea.

I've never seen them sold seperately, and you'd probably have a hard time finding the right size. If you were going to search the internet I would try something like that first.

Good luck

[kent]

Rhino has a white xs tower. That is the only one Ive seen.

[shawndoggy]

Would these work?

[Bobby Light]

Would these work?

That exactly what you want, you want the locking ones. Google Nylon Hole Plug.

[Malibudude]

Rhino has a white xs tower. That is the only one Ive seen.

Crash has one on his VTX as well.

[mcbean7]

That exactly what you want, you want the locking ones. Google Nylon Hole Plug.

Hey, good find guys. Do you know what size hole or plug is needed?

Edit: are the bolt holes the same internal diameter for Illusion X and XS towers?

Edited March 17, 2010 by mcbean7

[Bobby Light]

Hey, good find guys. Do you know what size hole or plug is needed?

Edit: are the bolt holes the same internal diameter for Illusion X and XS towers?

I know that the threaded holes are for 3/8" bolts but can't remember what the hole size is on the X tower. The XS threads directly into the tower and not a nutsert like the X. The light mount holes are 3/4".