Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Perfect Pass Gauge Lights Not Woking


Recommended Posts

When I turn on my dash accesory lights all the gauges and switches light up except the Pefect Pass gauge. I've checked all the wires at the back of the gauge and they all seem to be connected. Is there a physical bulb that burns out or do I just have a bad connection somewhere? Its the WakeBoard Pro version with the tach on the upper side of the gauge.

Link to comment

iirc there is an incandescent bulb and i think it is easily removable (if there is room to access the rear of the display).

i don't think that this was a very hearty design. physically it is swell. electrically marginal.

when you have the twist out piece in your left hand inspect/ burnish the metal conductor.

if you can access the back of the display burnish the copper portion of the printed circuit board, too.

a pencil eraser will work as a burnishing tool.

edited re. burnish.

Edited by tvano
Link to comment

iirc there is an incandescent bulb and i think it is easily removable (if there is room to access the rear of the display).

Your right, it un-plugs and twists out. Easy replacement, you just need to get to the back of the gauge.

-Paul

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...