Malibu G3 Tower

[airjunky]

Whats the tube size on the G3 Tower?

[Ndawg12]

Whats the tube size on the G3 Tower?

I read that the hoop is 3".

[Bill_AirJunky]

3" is probably a good guess.

Hey Jake, are you making SS rack adapters for the G3? The rack could also be bolted directly to the flat portion of the tower too... similar to how the old Illusion towers were mounted.

The Malibu dealer in Redding went out of business, huh. Let me know if you need some pics or measurements of the G3. I can either go down to the Yacht Club or ask Bret to do it for me.

[Woodsprinter]

Can the rack in general be mounted on G3 3" tube instead of "illusion bolt type"? Maybe too far to reach boards cuz tube is front side?

[Bake's Marine]

Whats the tube size on the G3 Tower?

The front Stainless hoop on the G3 tower is a 3"

Can the rack in general be mounted on G3 3" tube instead of "illusion bolt type"? Maybe too far to reach boards cuz tube is front side?

It could, the rack bracket would need to be at a angle, downfall is the rack would be too far forward on the tower and it would be awkward getting boards on and off the rack.

-Paul

[airjunky]

We are going to make rack adapters to fit the tower for sure, but they'll be block adapters with the necessary matching hole pattern thats already in that flat rear section of the leg. I will need some pics & that hole pattern in order to get that going. And yeah, since Oasis here in Redding went down its not easy for me to get that stuff anymore. Bill if you could pull that off that'd be great.

We also are making some mirror brackets that attach to the front hoop and extend forward & down in front & above the driver. We have them already for the old Illusion XS tower, so just want to make them work for the new tower too.

[Bill_AirJunky]

Just talked to Bret & he should have some pics to us this afternoon.