drain plug on port side

[arsenuts411]

The drain plug that is on the port side of the engine that you are suppose to remove for winterization my hot water for the shower is fed from that. I was wondering if I disconnect the quick connect that is attached to the shower temperture control unit to let it drain if I would have to still remove the plug from the block?

[eyepeeler]

If all of the water comes out, you are probably OK. If the water doesn't come out, you had better pull the plug.

[Wayne]

Whats the harm in removing it just to be sure? I would rather take a little extra time in winterizing than risk damage.

[Eric LX]

It would be a good idea to remove it and stick a piece of wire or small screwdriver in the opening to makes sure that there isn't any sand or debris building up.

[arsenuts411]

I guess that you guys are right for the few minutes that it will take I guess its worth it.