Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Hot water for shower

Recommended Posts

Do you tee into the heater hose, or a seperate feed?


Separate feed. You have knock sensors on each side of your block so instead you can take hot water from a fitting at the base of your exhaust manifold. It comes out with a Allen wrench, about 1/2 -3/4 inches wide. 3/8 ID hose barb to a 3/8 pipe thread.

Hope this helps!


Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...