Perfect Pass Install

[maliboomer1]

So I am installing PP into my boat and believe it or not the thing I am struggling with the most is how to replace the Tach guage with the new PP guage. Not sure how to get into the dash to do that. Any suggestions?

Thanks

[ed obermeier]

So I am installing PP into my boat and believe it or not the thing I am struggling with the most is how to replace the Tach guage with the new PP guage. Not sure how to get into the dash to do that. Any suggestions?

Thanks

Put it in my '05 RLXI a few weeks ago, not sure though if the dash setups are similar or not. On mine at the bottom center of the instrument panel is a chrome Malibu logo held in place by two screws. Remove the 2 screws, in the very top center of the instrument panel is a 3rd screw going up into the structure above, remove it too. The panel holding the gauges pops right out once you remove those 3 screws, that's all that's holding it. Hope this helps.

Ed

[maliboomer1]

So I am installing PP into my boat and believe it or not the thing I am struggling with the most is how to replace the Tach guage with the new PP guage. Not sure how to get into the dash to do that. Any suggestions?

Thanks

Put it in my '05 RLXI a few weeks ago, not sure though if the dash setups are similar or not. On mine at the bottom center of the instrument panel is a chrome Malibu logo held in place by two screws. Remove the 2 screws, in the very top center of the instrument panel is a 3rd screw going up into the structure above, remove it too. The panel holding the gauges pops right out once you remove those 3 screws, that's all that's holding it. Hope this helps.

Ed

Ed, thanks for the tip, that is exactly what I needed!

[bbrandau]

So I am installing PP into my boat and believe it or not the thing I am struggling with the most is how to replace the Tach guage with the new PP guage. Not sure how to get into the dash to do that. Any suggestions?

Thanks

Put it in my '05 RLXI a few weeks ago, not sure though if the dash setups are similar or not. On mine at the bottom center of the instrument panel is a chrome Malibu logo held in place by two screws. Remove the 2 screws, in the very top center of the instrument panel is a 3rd screw going up into the structure above, remove it too. The panel holding the gauges pops right out once you remove those 3 screws, that's all that's holding it. Hope this helps.

Ed

Ed, thanks for the tip, that is exactly what I needed!

I have to replace my Zero Off unit.

Any tips for putting the dash back together? I don't want to scratch up the vinyl with the plastic ...

Edited July 16, 2009 by bbrandau