Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

How do I wire my pumps & switches?


beast

Recommended Posts

when you run B your still limiting your current because you are only running one ground wire.

I think you should wire it like your A diagram, just use 12g wire from the battery to the switches

Link to comment

I can't speak to the wiring because I'd have to go look at how I have mine wired, but you should IMO consider using relays. The upper limit of those switches is very close to what the Simers will spike to upon startup. I've had a situation in the past on another boat where we didn't use a relay & the switch would get hot to the touch when the Simer was running. JMO of course.

Link to comment

The switches are rated at 20A. I have 20A fuses on the + leads. Do I need relays? So 2 ground & 2 positive 2 each switch? Like this?

358574888.jpg

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...