Filter number for LCR engine?

[Helinut]

The thread size is 1/4". Thanks for the heads up on the ebay auction. We'll see if it's a good day in 49 minutes.

If I recall (and I could be wrong) you need to get:

1) a 3/4" coarse thread to 1/2 pipe thread adapter; and

2) a 1/2" pipe thread to 1/4" pipe thread adapter.

Something like this anyway. When I was at the store, I found a couple of different routes between the 3/4" coarse thread to the 1/4" pipe thread. Of course you have to navigate the male-female (inside-outside threads) issues in that path as well. You'll figure it out.

Sounds about right. Thanks for the help.

[Lance B. Johnson]

Dont know if the pump worked for ya or not but I removed the paddlewheel insert for the speedo (very easily done) and I was able to route the hose over the top of the propshaft and just get it through. Won't work if you try to go under the propshaft.

I don't like the pump because there is always risk of getting oil inside the boat. much cleaner to just drop it out the bottom.

Very simple option #2. Add an extention to the hose via the fitting.