Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!



Recommended Posts

Here is how I did mine,

Make certain the throttle is really it the neutral position before you start.

Take the throttle cable connector off of the shifting arm at the transmission and hold it to the side of the arm.

Find the sweet spot of the center “click” for absolute neutral by moving the arm on tranny both ways and back a few times to get it dead on in the middle.

Then adjust the end connector on the cable back or forth to perfectly match the location of the tranny arm in the neutral position.

There may be a little “slop” in the throttle cable, so make sure that the engaging point either way (forward and backward) are the same.

Reattach the cable connector to the arm and make sure the lock nut and or locking collar on the cable connector is secure.

Edited by lakewaterjunky
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...