Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

What size thread in the Illusion tower holes?


kmagnuss_2000

Recommended Posts

Well, I'm trying to beat the system and install my own tower lights. I think $200 per light is a little obnoxious. So here's the scoop...I can't figure out what size the mounting holes are for the speaker mounts. I know, they're supposed to go on the top of the tower...but I don't want to have to drill new holes up there quite yet (those holes aren't threaded, plus you need a hollow bolt to run the wires through). So...does anybody know the size bolt I need to fit the speaker mounts on the sides of the tower? Thanks.

-Keith

Link to comment

I'm not sure what you are saying but I installed my lights myself for $100.00 ea. by borrowing the tool that inserts the hollow rivet like threaded mounts. There are three holes for each speaker mount 2 threaded and one non threaded for the speaker wire to go through. I think the threaded holes are 1/4" x 20 thread. Sorry if thats not what you are talking about.

Link to comment
I'm not sure what you are saying but I installed my lights myself for $100.00 ea.  by borrowing the tool that inserts the hollow rivet like threaded mounts. There are three holes for each speaker mount 2 threaded and one non threaded for the speaker wire to go through. I think the threaded holes are 1/4" x 20 thread. Sorry if thats not what you are talking about.

Where did you get your lites. I also thought 200.00 was a little much.

Link to comment
I'm not sure what you are saying but I installed my lights myself for $100.00 ea.  by borrowing the tool that inserts the hollow rivet like threaded mounts. There are three holes for each speaker mount 2 threaded and one non threaded for the speaker wire to go through. I think the threaded holes are 1/4" x 20 thread. Sorry if thats not what you are talking about.

Where did you get your lites. I also thought 200.00 was a little much.

Ultimate Watersports- Rancho Cordova

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...