Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

waterpump problem 350 vortec 310hp


Recommended Posts

I noticed this problem when I got the boat initially.

there's a little bit of spray coming from the back of the water pump. after a the boat is started from cold - and only when its sat for at least a few days. give it 10-20 seconds and it stops.

could it be a bad gasket or is the pump going?

the boat sits at 160 always.

Link to comment

Had this at one point a couple years ago started as small drip. Kept ignoring it. DON'T It's a small seal at back of impellar as I rememeber, If you let it go you'll be changing whole housing and shaft as it eventually wears out the shaft. Mike

Link to comment

its not the Raw water pump that houses the impeller, its the circulation or main water pump attached to the motor.

there is no drip at all, it sprays at cold start then goes away... weird

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...