Accessory switch for 1989 Malibu skier

[timandrew]

One of the push/pull accessory switches on my 1989 Malibu Skier stopped working. I can't find any current ones for sale that will fit--they're all too wide. Any suggestions on where I can find a replacement switch that exactly matches or will at least fit? I believe the diameter of the post is technically 19/64ths of an inch; so, essentially 5/16ths of an inch. Thanks.

[rugger]

1) If not a marine store, check an auto parts store. I've seen lots of the same or similar.

2) If the new ones look pretty much the same but require a bigger hole -- just drill a bigger hole. You could still use the knob off your bad one to match the others.

3) As a last resort, I had a similar boat but replaced my switches with rockers. I don't remember if I kept the old push/pull switches, but I'll look for you. All worked fine.