Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

rudder cable replacement


Recommended Posts

I have a 92 euro f3 that I am doing a number of things to. The previous owner "engineered" a few things and I don't trust everything on the boat. The rudder cable goes up the center of the boat and then bends and routes up through a the wiring harness channel in the center front of the boat then bends again towards the right and enters the left side of the helm. The new teleflex cable shows the routing along the the right side of the boat. Does anyone know the proper cable routing on this boat. Thanks, Pat

Link to comment
I have a 92 euro f3 that I am doing a number of things to. The previous owner "engineered" a few things and I don't trust everything on the boat. The rudder cable goes up the center of the boat and then bends and routes up through a the wiring harness channel in the center front of the boat then bends again towards the right and enters the left side of the helm. The new teleflex cable shows the routing along the the right side of the boat. Does anyone know the proper cable routing on this boat. Thanks, Pat

My 95 Sunsetter has everything running down under your feet, down the starboard side of the bilige back to the rudder and or engine.

Link to comment
I have a 92 euro f3 that I am doing a number of things to. The previous owner "engineered" a few things and I don't trust everything on the boat. The rudder cable goes up the center of the boat and then bends and routes up through a the wiring harness channel in the center front of the boat then bends again towards the right and enters the left side of the helm. The new teleflex cable shows the routing along the the right side of the boat. Does anyone know the proper cable routing on this boat. Thanks, Pat

My 95 Sunsetter has everything running down under your feet, down the starboard side of the bilige back to the rudder and or engine.

Thats the way mine is. Where it goes up towards the helm from the bilge it makes a steep bend and runs vertically through a fiberglass channel where the wiring harness goes etc (for lack of a better word) than makes like a 90 right bend into the helm. Thanks, Pat

Link to comment

I think mine runs down the center of the boat. I'm pretty sure it comes out of the left side of the helm and goes through a hole in front of your (drivers) left foot behind the kick panel.

Link to comment
  • 2 weeks later...

Just rebuilt a similar year/model and cable runs from the rudder/steering arm down the center of boat in the bilge to the right side of ski locker, and then bends up through the hole under the dash with the wiring harness. I would think yours would be similar.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...