Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
thethrillofspeed

Spinner Rack for a 1 7/8" Tower???

Recommended Posts

thethrillofspeed

My Tower has 1 7/8" tubing. I really like the Titan Spinner racks, but they don't make them for my size tower. Are there any other companies that make a spinner rack like the Titan?

I have a Nicerack folding rack, but in both positions it really sticks out on the side of the boat which will make for a challenging parking situation as the garage where I store my boat is VERY tight and I need all the room I can get.

I have found a couple of lift off racks, but they seem to need to be mounted on a vertical bar and the bar where I plan to mount the rack is angled. Are there any other options? Thanks!

Share this post


Link to post
skicrave

While we don't currently offer a Spinner rack for your Extreme tower, our Lift-Off racks will work just fine. They can be mounted horizontally, vertically or at a 45 degree angle.

Share this post


Link to post
onamission

I tried a lift off rack from Titan, but unfortunately it didn't work to well with the Xtreme towers smaller dimensions and angles. I know that there not lift offs, but I went the forks from Monster / Xtreme. Theres a pic in my gallery.

Share this post


Link to post
skicrave

I didn't have any problems with the couple of towers that I installed Lift-offs on. Both the rear vertical tube, and the oval shaped cross bar worked just fine. Dontknow.gif

Share this post


Link to post
99response

Do you need to use an oval clamp on the crossmembers? They don't look too uniform in size on my tower atleast.

-Chris

Share this post


Link to post
onamission
Do you need to use an oval clamp on the crossmembers? They don't look too uniform in size on my tower atleast.

-Chris

Yes, you need the oval clamps. The curve of the crossarm is deceiving, clamps fit fine. You can use either crossarm for mounting and have the forks pointing up or straight out.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...