Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  

Help! Overheated my boat...

Recommended Posts


Sorry last Post the Topic got garbled... big thumbs..

Got the boat working after replacing fluids etc... Forgot to open the main valve to allow water into the engine...

Anyways had it running in the water this morning idling and noticed water spraying into the engine compartment.

The exhaust elbows where the rubber meets the fiberglass elbows to the back were leaking water seems the fiberglass was weakend took them off and wondering where you can get these or easiest way to mold my own, as can fiberglass them back onto the existing pieces only the 90 degree piece needs replaced...

This is on a 90 Malibu F3 5.7liter engine. any suggestions welcomed.

Could one use PVC elbows with rubber collars? or is this too hot?



Share this post

Link to post

Fix it the right way, don't rig it. You make a mistake and now it's time to pay.

Share this post

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...