Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

code 81 / Troubleshoot switches


cucol

Recommended Posts

I have posted about having a constant beeping on my 02 sunscape 325hp monsoon. Still have the beep. The only code i have is code 81 Injector Driver A or B Circuit High, Low or Open. Anyone have any ideas?? Also can anyone tell me what each switch is suppose to read as far as normally closed or normally open while boat is turned off. I need oil pressure switch, water temp, transmission temp, and neutral saftey. Please help.

Link to comment

There are two circuits that supply the pulse to your fuel injectors. One is the blue circuit, the other is the green circuit. A red wire (+12 volt) is common to both. The ECM pulses both circuits to ground to supply the power to the injectors. It is evidently not seeing the current in one of these circuits at the proper range to which they are supposed to operate within. As far as the switches...open is the nornal position when the motor is running at normal conditions. Some switches (such as overtemperature) do not change state unless there is a problem, motor running or not.

Link to comment

My Monsoon does not have a water temperature switch, only a temperature sender for the gauge and a temperature sensor for the ECM. Where did you get the verbage on what a code 81 is?

Edited by electricjohn
Link to comment

UPDATE Thumbup.gif Figured out problem, it was a bad ecm and ignition module. I am back in bussiness. Thanks All for the help.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...