Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
jason browne

complete steering unit needed 1991 f3 skier

Recommended Posts

jason browne

Has any one here installed a complete steering unit for a '91 F3 skier? I would like to install one with a tilt helm. Any reccomendations? I have been looking at a few different models but not sure whch is best suited for this boat: Teleflex Saf-T-QC but this unit states it is for V8 with power assist. I cant find a unit that is for inboard, V8, manual with no assist. I did find NFB(no feed back)4.2 with tilt: states it is for outboards with no power assist. Thank You, Jason

Share this post


Link to post
jason browne
Has any one here installed a complete steering unit for a '91 F3 skier? I would like to install one with a tilt helm. Any reccomendations? I have been looking at a few different models but not sure whch is best suited for this boat: Teleflex Saf-T-QC but this unit states it is for V8 with power assist. I cant find a unit that is for inboard, V8, manual with no assist. I did find NFB(no feed back)4.2 with tilt: states it is for outboards with no power assist. Thank You, Jason

If any one is interested I have the part # from Teleflex.

Share this post


Link to post
jgutzy

Jason,

Look at www.skidim.com

Jim

Share this post


Link to post
Sunsetter95
Has any one here installed a complete steering unit for a '91 F3 skier? I would like to install one with a tilt helm. Any reccomendations? I have been looking at a few different models but not sure whch is best suited for this boat: Teleflex Saf-T-QC but this unit states it is for V8 with power assist. I cant find a unit that is for inboard, V8, manual with no assist. I did find NFB(no feed back)4.2 with tilt: states it is for outboards with no power assist. Thank You, Jason

I replaced my tilt helm and got the parts from Malibu. The only suggestion I can offer is to reinforce the bolt holes in the dash. I used some fender washers. You could also cut a piece of aluminum and use it as a big washer on the backside. It really firms up the helm.

Edited by Sunsetter95

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...