Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
larrys

Angle of foot rest?

Recommended Posts

larrys

My boat is 100 miles away. I need this info for a late model VLX.

Does anyone know what the angle of the foot rest is in relation to the floor?

I am having a custom sub-box made and want to duplicate the angle as close as possible.

Thanks!

Share this post


Link to post
woody
My boat is 100 miles away. I need this info for a late model VLX.

Does anyone know what the angle of the foot rest is in relation to the floor?

I am having a custom sub-box made and want to duplicate the angle as close as possible.

Thanks!

The foot rest is only held in by 4 screws and not very secure, I think your are going to get mixed numbers. I removed the foot rest and installed the sub myself and had to make some minor modifications to the foot rest angle. mine is positioned at approximately 135 degrees.

Good luck.

Share this post


Link to post
larrys
My boat is 100 miles away. I need this info for a late model VLX.

Does anyone know what the angle of the foot rest is in relation to the floor?

I am having a custom sub-box made and want to duplicate the angle as close as possible.

Thanks!

The foot rest is only held in by 4 screws and not very secure, I think your are going to get mixed numbers. I removed the foot rest and installed the sub myself and had to make some minor modifications to the foot rest angle. mine is positioned at approximately 135 degrees.

Good luck.

My last few boats, the foot rest was held in with 4 screws. This one it had at least 8 screws. Couldn't believe it!!!

Anyway, I am not going to replace the foot rest. I am going to just replace it with a box. I just wanted to get the angle close so it would look closer to the factory angle.

Thanks!

Share this post


Link to post
CedarLakeSkier

I bought a pre-built box and then built a wedge to attach the the bottom to get it at the correct angle. Then angle on mine was 60 degrees (or 120 depending on which direction you are measuring from)

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...