Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Slalom Course Entry Gates


thealy

Recommended Posts

Yes.gif For a full pass to count...both entrance and exit gates required.

WHAT?!! You mean I can't just hang outside 1-ball? I actually have to start on the left side and ski toward it?!!! Highway robbery I say. Cry.gif

(Sorry...a bit sarchastic today...it's Monday).

Link to comment

Nah. He didn't say you have to start on the left side--just that you need the gates. Try following the boat, straight through the gates, you'll be much closer to one ball than if you start way off to the left. Crazy.gif Let me know if this helps. ;)

Link to comment

There is one small exception to that... if you're skiing in an NSL tournament you can skip the entry gate at first. If I remember correctly after three passes of skipping the gates and skiing the intermediate balls you then have to hit the gate and ski the "real" skier balls.

Mike

Link to comment
Nah. He didn't say you have to start on the left side--just that you need the gates. Try following the boat, straight through the gates, you'll be much closer to one ball than if you start way off to the left. Crazy.gif Let me know if this helps. ;)

hahahaaaaa...I'll give that a try. That's good physics, I say.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...