Welcome to TheMalibuCrew!
As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!
On 5/28/2020 at 9:35 AM, Woodski said:
Friends boat has similar vibration, loose cutlass bearings were the cause. If you are concerned about bent shaft you could put a dial indicator on the shaft and spin to verify, although you can actually do a visual and be fairly sure. Use a tape measure or even some fixed length item like a screwdriver and hold against hull and sight it at the tip of the shaft and have someone rotate the prop, you will see any motion that way.
Should I be able to rotate my prop by hand, because I can't? I was in the water grabbing it with both hands and have no movement whatsoever.
Available all over the place. The OEM were Perko IIRC. Seadog has them too.
I just bought a 2000 Response and the rear storage hatch is looking pretty rough. It broke at the hinges. Can you buy these hatches or do i have to make one myself.
1 hour ago, jammer said:
@MWJ68 I've been experiencing similar overheating issues with my 2015 23LSV w/LSA (555). I know this was a couple of years ago -- but did you ever determine the root cause? Were you able to resolve it for good?
I'm still guessing that it was his circulation pump....
Anyone solve this?
I have the new 2020 24mxz and am looking for factory integrated RGB solution.
Who's Online 38 Members, 0 Anonymous, 245 Guests (See full list)
- t a
Most OnlineNewest Member
Joined 06/06/2020 02:21 PM