Welcome to TheMalibuCrew!
As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!
-
Recent Posts
-
Brandonloos21 158
8 hours ago, athingisathing said:I found the kit.... this has everything to connect to all the female plugs that plug into amps in the 2023 lsv with a 9502 and 1206.
This kit will have all you need. This and the color code and the bb-10 kit
Thoughts
No you will need the “b keyed” deutsch connectors. It varies which depending on how boat was ordered. Dt06-08pb dt06-08pb, tower speaker is always dt06-04 (not b key) and remote signal on boats with 6ch cabin is dt06-02 (not b key). Boats with 4ch cabin have remote signal on the 12pin. Just buy corresponding parts and pin them to the schematic.
-
cowwboy 376
12 hours ago, shawndoggy said:towers / brackets / racks / electronics / vinyl / hardware etc etc etc are all captive manufacturer specific items now. Shoot, Malibu even marinizes its own engines on the 2020+ boats. So I'm not sure it's accurate that the boat can be 100% serviced without access to malibu's parts catalog. Obvs shadetree hacks like myself can change the fluids, but when it comes to replacing a busted heat exchanger or something like that... that's gonna be a malibu specific part.
I'd guess malibuboatparts .com will grow to be more integral during this period. I know they stock a lot of the malibu specific stuff.
-
oldjeep 13,631
8 hours ago, kcpilotpat said:I have a vibration on a 2001 sunsetter 21. I put a dial indicator on the prop shaft. in front of the strut I had .003 runout. Just in front of the prop I have .035 runout. It looks like it's a b**** to pull the shaft. It's hard to get to the coupling under the Walters V drive. I'm considering trying to straighten the shaft using a hydraulic jack to push up on the shaft. I would do it slowly using the dial indicator to measure the deflection and sneak up on it. Has anyone in the group tried this? Is the shaft easier to get out than it appears to replace the shaft or have it professionally straightened? All input is appreciated. I'll post photos and experiences either way.
Pat
Seems like a good way to break something. Not sure that you should actually be able to straighten the shaft even out of the boat. Bent = replace.
- 23LSVOwner
- 1
-
Hemmy 1,343
4 hours ago, MalibuNation said:There's still Gull Lake Marine on the E side of Kalamazoo, MI.
And Coldwater, MI.
-
formulaben 1,881
Gotta love the 'Bu Crew!!!
-
-
Who's Online 26 Members, 0 Anonymous, 119 Guests (See full list)
- RobbieRas
- wedge88
- 23LSVOwner
- dalt1
- cowwboy
- hunter77ah
- Ovaltine
- JeffK
- SouthsideBoarder
- RyanB
- JpCrOOked
- Upperbaylsv
- BillFRlxi
- a_davis11
- oldjeep
- Brandonloos21
- efjeld
- wdr
- bcf2003
- Hemmy
- srab
- braindamage
- dizzygti
- Nick55
- bwski
- ahopkins22LSV
-
Member Statistics
42,264
Total Members8,865
Most OnlineNewest Member
Critter86
Joined